Switching Systems

Speed Frequency Switch

• Selectable frequency via DIP switches.
• Designed to work with all standard signal inputs e.g. magnetic pick up, computer signal, ignition coil, sensor.
• Ground signal sent once predetermined frequency has been reached.
• Adjustable hysteresis to help prevent chattering at the switch point.
• LED indicates activation.
• Epoxy filled for enhanced moisture & vibration protection.
• 12 or 24 volt operation, selectable via DIP switch.

Low Coolant Alarm

• Visual & audible warning device for water/coolant level monitoring.
• LED indicator on modules.
• 7 second “slosh” delay preventing false triggering.
• Epoxy encapsulated modules.
• Brass sleeve or rubber multi-fit style probes available.

Idle Timers

• Selectable idle time cycle.
• LED indicators for visual warning.
• Multi-voltage.
• Environmentally sealed - IP65.
• Push & toggle switch kits available.
• Suitable for Energised To Run (ETR) systems.Energised To Stop (ETS) model available on request.

Hand Brake Alarm

• Can be adapted to any vehicle.
• Can be used as a general 2 stage alarm module.
• Designed to signal when hand brake is not engaged and vehicle door opens.
• Satisfies mine site requirements.
• 2 stage outputs.
• Compact easy installation.
• Suitable for positive and negatively switched vehicles/applications.
• Epoxy filled for enhanced moisture and vibration protection.
• Clean contacts.
• 2 year warranty.

Headlights On

• Designed to operate park & low beam lights any time vehicle ignition is on.
• Can be wired to disable control unit eg. hand brake switch, door switch.
• 10 seconds start up delay.
• Compact easy installation.
• Diagnostic LEDs.
• Available in positively and negatively switching models.
• Epoxy filled for enhanced moisture and vibration protection.
• 2 year warranty.

Voltage Sensor

• Internal change-over relay activates when the voltage falls below or rises above the preset level.
• Adjustable sensing range.
• Example uses:
  - Helps prevent the over-discharging of a battery.
  - Triggering an alert when a battery discharges to a preset level.
  - Automatic activation of a battery charger.
• Made in Australia.
• 2 years warranty.

Tipper Switch

• Determines when there’s an unsafe lean on a raised tipper body.
• Solid state electronics.
• Microprocessor controlled.
• Multi-voltage.
• Data logs the last 15 activations.
• Conducts system self-tests.

Rollover Switch

• AS2809 compliant rollover switch.
• Solid state electronics.
• Microprocessor controlled.
• Multi-voltage.
• Senses vertical & horizontal axis through an accelerometer (angle and G-force sensing device).
• Conducts system self-tests without shutdown.
• EMF spike suppression.

Radio Remote Control

• 4 output, user programmable remote switching system.
• Palm-sized fob.
• Up to 90 metre range.
• Rolling codes, secure encryption.
• Multiple transmitters able to be paired with single receiver.
• All 4 outputs can be momentary or latching.
• Hard-wired interlock feature on 2 outputs.

Electronic Switch Module

• Electronically monitored switch centre with inbuilt circuit monitoring and protection.
• Each output set to 10A circuit protection.
• 10 inputs, 13 outputs.
• 1 grouped input – 4 separate outputs
• On board LEDs indicate circuit output.
• Saves space and installation time.
• Multi-voltage
• Environmentally sealed - IP67.
• Available in positive, or positive/negative switched models.

Programmable Switch Panels

• Developed to control lighting and other electronic automotive accessories.
• Incorporates the latest in onboard circuit protection and monitoring technology.
• 3 user configurable master switches.
• All switches can be set to latching or momentary.
• Mounting point on back of switch panel – use with common 1/4" thread adjustable mounts.
• Epoxy encapsulated receiver module for enhanced moisture and vibration protection.
• Includes 4 decals. 8 outputs (6A each).
• Multiple outputs can be combined to allow switching of high current loads.
• Eliminates excess wiring. Multi-voltage. Compact design.

Voltage Sensor

• Internal change-over relay activates when the voltage falls below or rises above the preset level.
• Adjustable sensing range.
• Example uses:
  - Helps prevent the over-discharging of a battery.
  - Triggering an alert when a battery discharges to a preset level.
  - Automatic activation of a battery charger.
• Made in Australia.
• 2 years warranty.

Tipper Switch

• Determines when there’s an unsafe lean on a raised tipper body.
• Solid state electronics.
• Microprocessor controlled.
• Multi-voltage.
• Data logs the last 15 activations.
• Conducts system self-tests.

Rollover Switch

• AS2809 compliant rollover switch.
• Solid state electronics.
• Microprocessor controlled.
• Multi-voltage.
• Senses vertical & horizontal axis through an accelerometer (angle and G-force sensing device).
• Conducts system self-tests without shutdown.
• EMF spike suppression.

Radio Remote Control

• 4 output, user programmable remote switching system.
• Palm-sized fob.
• Up to 90 metre range.
• Rolling codes, secure encryption.
• Multiple transmitters able to be paired with single receiver.
• All 4 outputs can be momentary or latching.
• Hard-wired interlock feature on 2 outputs.

Electronic Switch Module

• Electronically monitored switch centre with inbuilt circuit monitoring and protection.
• Each output set to 10A circuit protection.
• 10 inputs, 13 outputs.
• 1 grouped input – 4 separate outputs
• On board LEDs indicate circuit output.
• Saves space and installation time.
• Multi-voltage
• Environmentally sealed - IP67.
• Available in positive, or positive/negative switched models.

Programmable Switch Panels

• Developed to control lighting and other electronic automotive accessories.
• Incorporates the latest in onboard circuit protection and monitoring technology.
• 3 user configurable master switches.
• All switches can be set to latching or momentary.
• Mounting point on back of switch panel – use with common 1/4" thread adjustable mounts.
• Epoxy encapsulated receiver module for enhanced moisture and vibration protection.
• Includes 4 decals. 8 outputs (6A each).
• Multiple outputs can be combined to allow switching of high current loads.
• Eliminates excess wiring. Multi-voltage. Compact design.